You are just a few steps away from an elevated kitchen experience. You will need a wireless router supporting WiFi at 2.4GHz. If you are unsure of your router's capabilities, refer to the router manufacturer's manual. Follow along with the video below, or scroll down for step-by-step instructions.
CONNECT YOUR RANGE
Connect your JennAir® Range in just 7 simple steps.
DOWNLOAD NOW
STEP 1
Download and open the JennAir® App on your device. Select the + symbol at the top right of your screen and select your appliance category.
STEP 2
Select your model number from the list.
Your model and serial numbers are placed discreetly in the top right corner, under the knobs.
STEP 3
Locate the QR code behind the oven door on the lower right-hand side.
If you are able to connect via QR code, skip to step 5.
If you are unable to connect using the QR code, click “Need Help” at the bottom of your app screen.
STEP 4
Manually enter the SAID and MAC ID numbers found next to the QR code and click “Begin” to start connecting your range.
STEP 5
Select your 2.4GHz wifi network and enter the password.
Follow the in-app prompts and set the large knobs right of center on your range to “WiFi”.
The backlights on the knobs and start button will illuminate. Press the start button to begin connecting.
STEP 6
Your range is now connecting and may take several minutes to complete. During this process, the backlight on your start button should flash.
You’ll know it has successfully connected when the progress bar in the app is complete.
STEP 7
In the app, name your appliance to distinguish it from any other connected JennAir® appliances.
You can locate your appliance from the “My Appliances” screen in the app to access your appliances’ connected features.
The JennAir Epicenter’s dedicated specialists are standing by to answer any questions you have or help you troubleshoot your connection.
Mon-Fri 8am-8pm EST